Skip to content Skip to sidebar Skip to footer

An Fuel Fitting Size Chart

An Fuel Fitting Size Chart. What size are they, really? These adapters are ideal when connecting regulators and fuel lines to pumps and tanks, and are also useful for dry sump applications.

Speedflow Hose Fittings Brisbane, Queensland AN Hose
Speedflow Hose Fittings Brisbane, Queensland AN Hose from www.superformance.com.au

Each an size number has its own standard thread size [see column three of the chart]. The nominal outside diameter of the tubing is expressed in sixteenths of an inch increments and then given an equivalent dash number. Loading air & fuel system.

X Wall Thickness Lb./In (Psi) Lb./In (Psi) Sae Range 3/16” X 0.028” 17,000 3,200 1/4” X 0.028” 12,450 2,300 5/16” X 0.028” 9,450 1,800 3/8” X 0.028” 7,960 1,450 1/2” X 0.028” 5,850 1,050 Metric Range 4.75Mm X 0.7Mm 17,000 3,200 6Mm X 0.7Mm 13,000 2,400 8Mm X 0.7Mm 9,450 1,750


Dash size metric thread size male thread o.d. Using a chart‭, ‬you can determine the fitting’s nominal size by measuring the‭ ‬outer diameter of the threaded portion‭. You can convert any an fitting to its nominal inch size by dividing the an number by 16 as follows:

An Fittings And Stainless Steel Lines:


The nominal outside diameter of the tubing is expressed in sixteenths of an inch increments and then given an equivalent dash number. If your measurements for chest/bust and waist correspond to two different suggested sizes, order the size indicated by your chest/bust measurement. The line drawings below depict the actual.

Typical Layout For Expansion Joints.


Holley fuel system selection chart part number compatible up to 18.5v application fuel compatibility gph flow at rated psi and 13.5v holley recommendations for peak performance holley recommendations for peak performance max hp* pump fitting size minimum recommended line size fuel filter (carbureted) fuel filter (fuel injected) recommended. Moreover, what size is an fitting? Raceflux straight swivel seal an hose end fitting.

Click To See Full Answer.


One glaring mismatch is the popularity of 5/16 (8mm) fuel hose on automobiles. The following chart is intended as a quick reference guide for thread size by dash size. Approximate maximum flow rates through schedule 40 pipe & fittings for selected line velocity.

Here Is An An Size Chart


12 rows fitting size chart. ‬the larger npt‭ ‬fittings are less. These are the same thread sizes that have been used in aircraft and industrial applications for many years.

Post a Comment for "An Fuel Fitting Size Chart"